Regviz

NXP Semiconductors /MIMXRT1011 /DCDC /REG2

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as REG2

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/NXP Semiconductors/MIMXRT1011/DCDC/REG2#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0LOOPCTRL_DC_C 0LOOPCTRL_DC_R 0LOOPCTRL_DC_FF 0LOOPCTRL_EN_RCSCALE 0 (LOOPCTRL_RCSCALE_THRSH)LOOPCTRL_RCSCALE_THRSH 0 (LOOPCTRL_HYST_SIGN)LOOPCTRL_HYST_SIGN 0 (BATTMONITOR_EN_BATADJ)BATTMONITOR_EN_BATADJ 0 (DISABLE_PULSE_SKIP)DISABLE_PULSE_SKIP 0 (DCM_SET_CTRL)DCM_SET_CTRL

Description

DCDC Register 2

Fields

LOOPCTRL_DC_C

Ratio of integral control parameter to proportional control parameter in the switching DC-DC converter, and can be used to optimize efficiency and loop response
LOOPCTRL_DC_R

Magnitude of proportional control parameter in the switching DC-DC converter control loop.
LOOPCTRL_DC_FF

Two’s complement feed forward step in duty cycle in the switching DC-DC converter
LOOPCTRL_EN_RCSCALE

Enable analog circuit of DC-DC converter to respond faster under transient load conditions.
LOOPCTRL_RCSCALE_THRSH

Increase the threshold detection for RC scale circuit.
LOOPCTRL_HYST_SIGN

Invert the sign of the hysteresis in DC-DC analog comparators.
BATTMONITOR_EN_BATADJ

This bit enables the DC-DC to improve efficiency and minimize ripple using the information from the BATT_VAL field
DISABLE_PULSE_SKIP

Set to “0” : stop charging if the duty cycle is lower than what set by dcdc_neglimit_in
DCM_SET_CTRL

Set high to improve the transition from heavy load to light load

Links

()

Register License

Copyright 2016-2019 NXP All rights reserved.

SPDX-License-Identifier: BSD-3-Clause

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data